BDT FLASHER - LIVE NOW

Tune Your Own Car.From Your Driveway.

Plug in. Pick your map. Hit Flash. Your car sounds different in 20 minutes. No appointment. No screen-share.

Download Now
Free / Windows + macOS / No Subscription
Now Mac Compatible
Same app, same speed, same Apple-clean feel your laptop deserves.
Existing BDT customer? Email boostdynamictuning@gmail.com or text (843) 891-6687 and we'll get your tune set up in the flasher.
In The Garage

Fourteen Cars. One App.

If your daily is on this list, your driveway just became a tuning bay. New platforms drop monthly - hit us up if yours isn't here yet.

2015-2021
VW MK7 / MK7.5 GTI2.0T EA888.3
MMS
2015-2021
VW MK7 / MK7.5 Golf R2.0T EA888.3
MMS
2015-2021
VW MK7 / MK7.5 Golf1.8T EA888.3
MMS
2015-2021
VW Golf Alltrack1.8T EA888.3
MMS
2015-2019
VW Golf SportWagen1.8T EA888.3
MMS
2015-2021
Audi A3 8V2.0T EA888.3
MMS
2015-2021
Audi S3 8V2.0T EA888.3
MMS
2015-2021
Audi TT 8S2.0T EA888.3
MMS
2015-2021
Audi TTS 8S2.0T EA888.3
MMS
2015-2021
VW Jetta 1.8T
Standard
2015-2021
VW Jetta GLI2.0T EA888.3
Standard
2015-2018
VW Passat1.8T & 2.0T
Standard
2015-2018
Audi A6 C72.0T
Standard
2015-2018
Audi A7 C72.0T
Standard
Soon
B9.5 Mild Hybrid, MK8 GTI, 4.0T V8In active dev
MMS cars get our full multi-map switching (5 tunes via cruise stalk), rolling anti-lag, and on-the-fly crackle pop control. Standard cars get every BDT tune feature except the cruise-stalk switching - but you still get every crackle pop stage (off, low, medium, intense) for free, picked at flash time.
What You Get

Built For Drivers. Not Spreadsheets.

Hit Flash. Go Drive.
15-20 minutes start to finish. Live progress bar, checksum verification, auto-abort if anything looks wrong. The flash either works or it stops you cold - no in-between.
Five Maps, One Stalk
Stock. 93 pump. E85 race. Valet. Whatever. Switch between five tunes with your cruise control - no laptop, no waiting. MMS cars only.
Back To Stock In 20
Your factory file is saved before any flash. Dealer visit coming up? Flash back, no trace, no warranty drama. Re-flash when you leave.
Every Crackle Stage. Free.
MMS cars switch crackle stages from the cruise stalk on the fly. Standard cars get every stage (off, low, medium, intense) included free at flash time - pick your level, mash flash, done.
Scan + Clear Codes
Read fault codes straight from your ECU. Clear them with one click. No more $80 trip to the dealer just to reset a CEL after you swapped your downpipe.
Brick-Safe By Design
Checksum verification before write. Auto-abort on connection drop. Recovery mode if anything mid-flash goes sideways. Built to be safer than a typical TeamViewer flash.
In Development
Coming Soon
Data Logging
Real-time logging of boost, AFR, timing, IAT, knock, fueling - straight to a CSV. Send us the log, we tweak your file. The same workflow shops use, in your driveway.
Coming Soon
Transmission Tuning
DSG / TCU flashing built directly into the BDT Flasher. Firmer shifts, raised torque limits, launch control sync - all from the same app you use for the ECU.
Four Clicks To Faster

How It Goes Down.

01
Download
One-click installer for Windows or Mac. 30 seconds.
02
Plug In
OBDII cable from laptop USB to the port under your dash.
03
Sign In
Your purchased tunes show up automatically. Pick one.
04
Send It
Hit Flash. Wait 15-20 minutes. Pull out of the driveway.
Before You Send It

Pack The Garage.

Windows 10/11 or macOS laptop
Both fully supported. Use whichever you have.
OBDII to USB cable
Tactrix Openport 2.0 - same one we use in the shop
Stable internet
50+ Mbps wifi or hardwired - no flaky coffee shop signal
Healthy 12V battery
Or a CTEK maintainer plugged in - the flasher doesn't monitor voltage, so this is on you
Engine OFF, key in accessory
Park safe, lights off, accessories off, doors closed
A BDT account & a purchased tune
Existing customer? Text (843) 891-6687 to get set up.
Straight Answers

Real Questions, No B.S.

Is the BDT Flasher free?
Yes. The app costs nothing. You pay for the tune you buy from us. Flash it as many times as you want at no extra charge.
Does it work on Mac?
Yes - macOS is fully supported. Same app, same features, same speed as the Windows build. We built the Mac version because we ride for our Apple customers too.
I already bought my BDT tune before this existed - does it still work?
Your tune is already on your account. Download the flasher, sign in, it's right there. If you don't see it, email boostdynamictuning@gmail.com or text (843) 891-6687 and we'll set you up.
Can I brick my ECU using this?
The flasher has checksum verification, auto-abort on connection drop, and recovery mode for almost every failure. It does not monitor battery voltage - that's on you (plug in a battery maintainer or run a fresh battery). Otherwise it's built to be safer than a typical TeamViewer flash.
What about data logging? TCU tuning?
Both in active development. Data logging drops first - real-time boost/AFR/timing/IAT/knock straight to a CSV you can send us for tune adjustments. TCU/DSG tuning is right behind it. Both will be free updates when they release.
My car isn't on the list. When will it be?
B9.5 mild hybrid, MK8 GTI, 4.0T V8 are in active dev. Email us with your car and we'll let you know when it drops.
Do I still need to schedule a TeamViewer flash?
If your car is on the supported list above - no. The BDT Flasher handles everything end to end. TeamViewer is still around for platforms we haven't ported yet.
What if something goes wrong mid-flash?
Call or text +1 (843) 891-6687. We answer during business hours and the flasher has a recovery mode for almost every failure. Worst case we walk you through it on the phone.
Last Stop

Stop Scrolling. Start Flashing.

Twenty minutes from now your car can sound louder, pull harder, and launch off the line like it owes you money. Whenever you're ready.

Download The Flasher
Need a hand? Call +1 (843) 891-6687 or email boostdynamictuning@gmail.com